• <div id="7yqay"></div>

  • <em id="7yqay"></em>

      恒泰源聚氨酯

      我們專注于鞋底用聚氨酯

      ZG-P-7325/ZG-I-7620

      產品編號
      數量
      -
      +
      庫存:
      Product description
      參數
      牌號( Shop sign): ZG-P-493/ZG-I-338
       
      低硬度,低密度,聚醚型鞋墊鞋底原液
       
      1.特性:低硬度,低密度,聚醚型
       
      Characteristics:Low hardness,low density,Polyether insoles.
       
      2.用途:適用于聚醚鞋墊的生產
       
      Application:Applicable for the production of polyether insoles for men and women.
       
       
       
      3. 原液特性Typical properties of PU Resin
       
      品名 外觀 粘度(Pa·s/50℃) 密度(g/cm3/40℃) 包裝(kg)
      ZG-P-493 白色或淡黃,液狀無異物White or pale yellow, liquid, no foreign material 0.30-0.70 1.00-1.05 18
      ZG-I-338
      透明液體無異物Transparent liquid, no foreign material 0.10-0.30 1.00-1.05 20
       
      參考發貨配比(Reference shipments ratio):A/B=33/20(桶)
       
      Reference shipments ratio: A/B=33/20(barrel)
       
      測試項目Test item 參考物性值Reference physical properties
      鞋底成型密度Molded density of sole(g/cm3 0.3-0.4
      硬度(A型)Hardness (type A) 10-25
      拉伸強度Tensile strength(MPa) 2.0-3.0
      伸長率Elongation(%) 350-550
      NBS耐磨NBS abrasion resistance(%) ≥10%
      自由泡密度Free foam density(g/cm3 0.22-0.36
      耐折性(常溫)(4萬次裂口長度,mm)Folding endurance (room temperature)(40,000 gap length mm) <8
       
      4. 成型條件及物性值(Molding conditions & physical properties):
       
       
      ●配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。
       
      Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.
       
      ●自由泡沫密度會依季節(溫度,濕度)的不同而變化。
       
      Free foam density will vary with the seasons (temperature, humidity).
       
      ●脫模時間會隨成型品厚度的增加而延長。
       
      Stripping time will be extended with the increase of the thickness of moldings.
       
      ●耐折條件:屈撓角度為 90度,頻率為80次/min*4萬次。
       
      Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times
       
      ● 以上數據僅作參考,具體數據以實際操作為準。如需其他物性指標,請與我公司聯系。
       
      Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.
      未找到相應參數組,請于后臺屬性模板中添加

      地址:

      浙江省溫嶺市工業園區一號路科技園

      手機:

      0086 13575886789

             

      EN    PT
      ES    RU

      Copyright ? 浙江恒泰源聚氨酯有限公司 版權所有  浙ICP備20019453號 

      中文 |EN | PT | ES | RU

      搜索
      搜索

      +86-13575886789

      舒美玉高潮